Initial Set Up; Connect To Power - Instant Pot Ripc41-Bk Benutzerhandbuch

INITIAL SET UP

Clean and assembly before use
1. Wash the cooking pot with hot water and soap. Rinse and use
a soft cloth to dry the outside. Or you can wash the cooking pot in
the dishwasher.
2. Wipe the heating element inside the multi-cooker base with a soft
cloth to ensure there are no stray packaging particles.
3. Install the condensation collector. See the instructions on page 37.

Connect to power

When you're ready to use your Instant Pot, plug the power cord into
an electrical outlet. When you're done cooking and whenever you're
cleaning the multi-cooker, unplug the cord from the outlet.
Test run
Performing a test run is a great way to familiarise yourself with how
the multi-cooker works before you actually cook a meal.
To perform a test run:
1. Add 750ml water to the cooking pot.
2. Place the cooking pot into the multi-cooker base.
3. Place the lid on top of the multi-cooker base and turn to lock.
See 'How to close the lid' on page 15.
4. Press Pressure Cook.
5. Press the
6. Press Keep Warm to turn off Keep Warm.
7. Press Start. The Progress Indicator shows
8. When the pressure is ready, the Progress Indicator shows
Up or Down arrows to select 5 minutes time.
User Manual
12
Preheat.
Cook.