Hitachi RC-BGH1FA0G Bedienungsanleitung Seite 36

Weekly Timer Operation
Step 2: Select Mode A or Mode B and activate or deactivate Weekly Timer.
OK
OK
OK
NOTE
● When setting On Timer, Off Timer, My Mode with Timer programming, operation of Weekly Timer is
interrupted. After On Timer, Off timer, My Mode with Timer programming is complete, Weekly Timer
operation will be activated.
● When On Timer, Off Timer, My Mode with Timer programming is cancelled, operation of Weekly Timer is
also cancelled. Need to set Weekly Timer operation for activation.
● After auto restart, Weekly Timer operation is cancelled. Need to set Weekly Timer operation for activation.
H ow to select Mode A or Mode B of Weekly Timer setting.
1
1. Press (Weekly) button.
Mode A will blink first).
2
2. Press (Weekly) button again.
3. S elect Mode A or Mode B. Press
the remote controller towards the indoor unit for about 3 seconds.
Timer lamp on the indoor unit will blink rapidly.
After beep sound emitted from indoor unit, Timer lamp will light up.
3 Please ensure that the Timer lamp lights up.
This indicates that Mode A or Mode B selection and active Weekly
Timer have been confirmed.
Setting non-active Weekly Timer .
1. Direct the remote controller towards the indoor unit and press
(Cancel) button.
Beep sound will be emitted from indoor unit and Timer lamp will be
1
OFF. Reservation indication on remote display will also disappear. This
indicates that non-active Weekly Timer has been confirmed.
● T o activate back the setting of Weekly Timer , repeat the steps for
"How to select Mode A or Mode B of Weekly Timer setting".
- 36 -
and blink on the display. (Normally
and blink on the display.
(Send) button while directing