Hitachi RC-BGH1FA0G Bedienungsanleitung Seite 34

Weekly Timer Operation
● Ι t is possible to select Mode A or Mode B. For each mode, up to 6 programs can be set per day. In total,
a maximum of 42 programs can be set for a week for each mode.
● Ι f calendar and clock are not set, the reservation setting for Weekly Timer cannot be set.
● Ι f calendar and clock are not set correctly, Weekly Timer will not operate correctly.
● R eservation for calendar and clock shall be set first before operating Weekly Timer.
Step 1 : Set the reservation schedule to the remote controller. Send the registered reservation to indoor
unit and then operate.
Step 2 : Select Mode A or Mode B and activate or deactivate Weekly Timer .
Step 3 : Copy and cancel the reservation schedule.
Step 1 : Set reservation schedule to the remote controller. Send the registered
reservation to indoor unit and then operate.
How to set a Weekly Timer.
1. S elect Mode A or Mode B
1
Press (Weekly) button.
display. (Mode A is selected).
2
Press (Weekly) button again,
B is selected).
● I f no reservation has been made, ON/OFF,
● I f reservation has been made, ON/OFF,
appear.
2. Set a program
Press (Weekly) button for about 3 seconds. The selection mode
can be changed.
, day: Mon, program no. : 1, ON/OFF, setting time and setting
temperature blink on the display.
3. Select the desired day of the week
Press (DAY) button.
The day changes from Mon
3
Mon, Tue, Wed, Thu, Fri, Sat, Sun [Full days]
Thu, Fri [weekday]
Select [Full days] for daily reservation.
Select [weekday] for Monday to Friday reservation.
Select [weekend] for Saturday and Sunday reservation.
● A fter reservation has been set, it is easy to check and edit at the
same time.
4. Press button to select a program number
The number changes from 1
● I f program number has been set, follow above in order to make
4
changes.
- 34 -
lights up. and
and blink on the display. (Mode
Tue Wed Thu
Sat, Sun [weekend] Mon
2 3 4 5
blink on the
appear
will not
Fri Sat Sun
Mon, Tue, Wed,
Tue ......
6 1 2 .....