Hitachi RC-BGH1FA0G Bedienungsanleitung Seite 13

FrostWash 3.0 (Auto Mode) and DuraSpin (Auto Mode)
● P ress Temperature Up button
1
● I f FrostWash 3.0 (Auto) and DuraSpin (Auto) is not beding used for a long period, it may
● P ress Temperature Down button
2
● T he screen on remove controller.
Note : F rostWash 3.0 (Auto Mode) and DuraSpin (Auto Mode) all set and cancel by Temperature Up button
Down button and FrostWash 3.0 button
Indoor FrostWash 3.0 (Auto Mode)
Indoor FrostWash 3.0 auto start conditions
Accumulated operating hours of the air conditioner have exceeded 42 hours
Air conditioner is operated for more than 30 minutes and stops, such as cooling operation
Human sensor detects somebody is in room for 15 minutes and over 4 times; or not in room for 15 minutes
Accumulated operating hours of the air conditioner
have exceeded 42 hours
Operation such as
Last FrostWash 3.0
cooling operation
Running
15 min
in room
detect human
in room or not in room
● W hen the outdoor temperature or indoor humidity are not suitable for FrostWash 3.0 operation, only fan operation is carried out,
FrostWash 3.0 operation will be done again when room air conditioner is in standby mode.
● S ometimes the heat exchanger may not freeze depending on the conditions of the room.
● W hen the ON timer reaches the set time during FrostWash 3.0 operation, it will stop the FrostWash 3.0 operation and start the operation
of setting mode.
● I f the interval of the OFF to ON timer is less than 2 Hours, FrostWash 3.0 operation may not be complete. In that case, it will restart
FrostWash 3.0 operation when room air conditioner is in standby mode.
● T o return to normal FrostWash 3.0 (Auto mode) interval (42 hours), please stop operation of air conditioner and operate FrostWash 3.0
(Auto mode) or FrostWash 3.0 (Manual mode).
● W hen FrostWash 3.0 operation has not been operated in last 84 hours, FrostWash 3.0 kicks in automatically after halting the operation
even if a human sensor detects a person in the room.
● W hen FrostWash 3.0 is stopped during FrostWash 3.0 operation, the unit automatically restart FrostWash 3.0 operation at the next
operation stop.
How to enable FrostWash 3.0 (Auto) and DuraSpin (Auto)
togetherwhile remote control in OFF mode with directing remote control towards Indoor unit.
is diaplayed on the LCD indicating FrostWash 3.0 (Auto) and DuraSpin (Auto) enable.
not be possible to completely remove the dust and dirt adhering to indoor hear exchanger.
This will cause odour. Hence, kindly operate FrostWash 3.0 frequently by using the remove
controller.
How to disable FrostWash 3.0 (Auto) and DuraSpin (Auto)
togetherwhile remote control in OFF mode with directing remote control towards Indoor unit.
disapear on the LCD indicating FrostWash 3.0 (Auto) and DuraSpin (Auto) disable.
When FrostWash 3.0 (Auto) and DuraSpin (Auto) is enabled, "
When FrostWash 3.0 (Auto) and DuraSpin (Auto) is disable, "
combination as above.
About 30 minutes or more
Operation such as
cooling operation
Stop Running Stop
15 min
in room
in room detect human
in room or not in room
- 13 -
(For single model connection)
and FrostWash 3.0 button
and FrostWash 3.0 button
FrostWash 3.0 start
not in room
About 8 min not in room
not in room
Fan operation
About 15 min
detect human
in room or not in room
in room
15 min
detect human in room
in room or not in room
for 3 seconds
for 3 seconds
" is displayed on the LCD.
" is disappeared on the LCD.
or
FrostWash 3.0 end
120min (max)
FrostWash 3.0
Auto Stop
FrostWash 3.0 end
120min (max)
Auto Stop
FrostWash 3.0