Hitachi RC-BGH1FA0G Bedienungsanleitung Seite 32

My Mode(Programming)
How To programming the My Mode
OK
NOTE
● I f operation of remote controller will not be done for 10 seconds during My Mode programming, remote
controller will come out from My Mode programming without registering of My Mode Programming.
Without registering of My Mode Programming, My Mode selection will remain with all previously selections
and previous values.
● I f My Mode button is kept pressing for 5 seconds during My Mode Programming, remote controller will
come out from My Mode programming.
Without registering of My Mode Programming, My Mode selection will remain with all previously selections
and previous values.
● I f My Mode timer has elapsed, press My Mode button again to restart the Timer operation.
● I f battery is replaced, or reset key is pressed, My Mode settings on Remote controller will be reset to
default settings. if new settings are required carry out My Mode programming again.
● W hen operation mode lock is set, selectable mode during My Mode will be limited.
● A ny timer can not be set if My Mode is selected.
● I f weekly timer is already set and press My Mode button then,
1. If selected My Mode does not have program On/Off timer then weekly timer symbol appear on remote
controller display along with My Mode icon and weekly timer continue works.
2. If selected My Mode have program On/Off timer then weekly timer symbol disappear from remote
controller display until My Mode On/Off timer get execute/expire. Then weekly timer will continue in work
and weekly timer symbol also appear on remote controller display.
Off Timer Setting
● Press ( Off Timer) Button to select OFF timer.
6
and " " or previous "set time" Symbol start blinking on LCD
screen.
● Press button to set desire OFF timer.
● Press button. It will set OFF timer programming.
and set OFF time Symbol stop blinking on LCD screen.
● To cancel OFF timer, Press
On Timer Setting
● Press ( On Timer) Button to select ON timer.
and " " or previous "set time" Symbol start blinking on LCD
screen.
7
● Press button to set desire ON timer.
● Press button. It will set ON timer programming.
and set ON time symbol stop blinking on LCD screen.
● To cancel ON timer , Press
Set and active My Mode
● Once all desire setting complete , Press
8
" blinks.
● It will save all setting done from step 2 to 7 and activate My Mode with
Buzzer sound from indoor unit.
- 32 -
button.
button.
(On/Off) button during "