Hitachi RC-BGH1FA0G Bedienungsanleitung Seite 12

Indoor FrostWash 3.0 operation
● T he dust and dirt adhering to indoor heat exchanger which is the cause of the smell. They are washed away by freezing
and thawing of the heat exchanger.
● F rostWash 3.0 function can work when the outdoor temperature is 1°C to 43°C and Indoor humidity is 30% to 70%.
The process of Indoor FrostWash 3.0
Operation is started
Normal operation
Operation is
● " " lamp on the indoor unit lights up during FrostWash 3.0 operation.
● W hen pressing "On/Off" button during FrostWash 3.0 operation, FrostWash 3.0 will stop.
● In order to protect the product, FrostWash 3.0 function cannot be carried out again for about 60 minutes
after FrostWash 3.0 operation is completed.
Indoor FrostWash 3.0 (Manual Mode)
When the unit is off, press
1
2
Precautions for Use
● Do not open windows or doors during FrostWash 3.0 operation. Water will condense on the air deflector and
drips down occasionally. This will wet your furniture.
● Do not open or remove the front panel during FrostWash 3.0 operation. It may cause injury or malfunction.
● FrostWash 3.0 operation does not wash away all dust and dirt.
● Hissing, fizzy or squeaking noise may generate during FrostWash 3.0 operation.
● If the air conditioner is continuously running, FrostWash 3.0 function is not effective.
● During FrostWash 3.0 operation, if power is turned off and then power is restored, FrostWash 3.0 function will
not restart.
● After turning on the power, please wait a moment if you want to start FrostWash 3.0.
● If On timer or Off timer or weekly timer is set , there is a need to cancel those timer before operating FrostWash 3.0.
● If My Mode is selected then FrostWash 3.0 operation will not work.
● For multi connections,
1. Only one indoor unit is allowed to be started FrostWash 3.0 operation.
2. The indoor unit that started FrostWash 3.0 first has priority, and FrostWash 3.0 is executed.
3. The air conditioning operation takes precedence over indoor FrostWash 3.0.
is pressed
FrostWash 3.0 operation
120min (max)
stopped
(FrostWash 3.0) button, manual FrostWash 3.0 will start.
How to start and cancel indoor FrostWash 3.0 (Manual mode).
● P ress the FrostWash 3.0 button
on LCD screen. FrostWash 3.0 operation start with beep sound and
lamp light up on the indoor unit.
● A fter one hour, " " & "
hours, the indoor unit will stop FrostWash 3.0 operation.
● I n order to protect the product, FrostWash 3.0 function cannot be carried
out again for about 60 minutes after the FrostWash 3.0 operation is
completed.
● P ress the (On/Off) button, the operation will stop.
" " lamp on the indoor unit turns off.
- 12 -
Unit remain in standby mode
FrostWash 3.0 ends
, FrostWash 3.0
" disappears from the LCD. After about two
& display