Hitachi RC-BGH1FA0G Bedienungsanleitung Seite 19

Once Timer (On/Off Timer) Operation
To cancel Reservation
● P oint the signal window of the remote controller towards the indoor unit and press
and "On or Off set time" goes out with a beep and the (Timer) lamp on the indoor unit turns off.
NOTE
● T he timer may be used in three ways: Off Timer, On Timer and On/Off (Off/On)-timer. Set the current time first because it
serves as a reference.
● O n Timer and Off Timer can be set simultaneously.
● I f Weekly Timer already set, by setting the Once timer, Once timer operation is prioritized. When Once Timer operation is
complete, Weekly Timer operation will be activated.
● O n timer, Off timer or On/Off timer will get cancel if My Mode, LeaveHome key pressed.
● D uring Once Timer Setting, if you do not press Time Up/Down key within 1 minute then it will come out of Timer setting
mode.
● W hen both timer set simultaneously then
● I f Once timer is set then Clock setting can not be changed. If Clock button press during Once timer set, it will display set
Day and Month for about 10 seconds.
Off Timer
The device can be set to turn off at a preset time.
1. Press (Off Timer) button.
2. S et the "turn-off" time with
1
3. After setting, direct the remote controller towards the indoor and press
(Send) button.
and "set time" lights up instead of blinking.
A beep sound emitted from indoor unit and the (Timer) lamp on the indoor
unit lights up
On Timer
The device will turn on at a designated time.
1. Press (On Timer) button.
2. Set the "turn-on" time with
3. After setting, direct the remote controller towards the indoor and press
(Send) button.
and "set time" light up instead of blinking.
A beep sound emitted from indoor unit and the (Timer) lamp on the indoor unit
lights up
On/Off Timer
● T he device will turn on (off) and off (on) at the designated time.
● T he switching occurs first at the preset time that comes earlier.
● T he arrow mark appears on the display to indicate the sequence of switching
operations.
1. Press (Off Timer) button so that
2. S et the "turn-off" time with
controller towards the indoor and press
3. Press (On Timer) button so that
and blink.
4. Set the "turn-on" time with
5. After setting, direct the remote controller towards the indoor and press
(Send) button
and set "turn-on" time light up instead of blinking.
A beep sound emitted from indoor unit and the (Timer) lamp on the indoor unit
lights up.
or on LCD appear with Timer which will going to execute/expire first.
- 19 -
and blink on the display.
(Time) button.
and blink on the display.
(Time) button.
and blink on the display.
(Time) button. After setting, direct the remote
(Send) button.
and set "turn-off" time light up. The
(Time) button.
(Cancel) button.