Adjusting The Length Of The Telescoping Tube; Accessories - Cleanmaxx Z 07420 Gebrauchsanleitung

Inserting the telescoping tube

Adjusting the length of the telescoping tube

Accessories

ATTENTION!
• Always turn off the device and pull the mains plug out of the socket before you
change the nozzles!
The different nozzles can be mounted either on the tapered end of the telescoping
tube or directly on the handle.
07420_DE-EN_FR-NL_A5_V1.indb 19 07420_DE-EN_FR-NL_A5_V1.indb 19
19
1. Insert the handle in the straight end of the telescoping
tube. For better seating, gently turn the tube back and
forth in the process.
2. Insert the tapered end of the telescoping tube in the de-
sired nozzle (see also section "Accessories"). For better
seating, gently turn the tube back and forth in the process.
3. If not in use, you can attach the tile and brush nozzle to
the bracket provided on the handle as shown.
1. Push the slider up and hold it down.
2. Set the desired length of the telescoping tube and release
the slider.
3. Push the telescoping tube further until it audibly locks into
place.
EN
15.07.2015 09:18:41 15.07.2015 09:18:41