Adjusting The Length Of The Telescoping Tube; Accessories - Cleanmaxx MULTIZYKLON PLUS Gebrauchsanleitung

Adjusting the length of the telescoping tube

Accessories

ATTENTION!
❐ Always turn off the device and pull the mains plug out of the socket before you
change the nozzles!
The different nozzles can be mounted either on the tapered end of the tel-
escoping tube or directly on the handle.
Please note: The illustrations in these instructions may vary slightly from the real device.
Floor nozzle
Tile nozzle
Brush nozzle
1. Push the slider up and hold it down.
2. Set the desired length of the telescoping tube and release
the slider.
3. Push the telescoping tube further until it audibly locks into
place.
The fl oor nozzle is suitable both for carpets and smooth
fl oors. You can switch between a smooth fl oor and carpet
using the foot switch:
• A brush and rubber lip can be folded out on the bot-
tom of the nozzle for smooth fl oors.
• The brush and rubber lip are folded in when cleaning
carpet fl oors.
The tile nozzle is suitable for padding, cleaning the inside
of passenger vehicles as well as every nook and cranny
that can't be reached with other nozzles.
The brush nozzle is suitable for all uneven objects, furni-
ture, lamps, profi ling strips and baseboards, window sills
etc.
18