2. Intended Use
The intended use of the tyre pressure monitor system comprises monitoring and display of the tyre pressure and the
tyre temperature in motor vehicles.
This system is only approved for connection to a 12/24 V direct voltage board mains with the car battery's negative
pole at the car body. It must only be installed and used in vehicles with this board voltage type.
Never connect the device to the 230 V mains.
The user must make sure that the way the display unit is installed protects the product from humidity and wetness.
Any use other than that described above will damage this product and involves the risk of short circuit, fire, electric
shock, etc.
The system must not be modified or converted, and the casing must not be opened.
Observe all safety and assembly notes in these operating instructions!
3. Explanation of Symbols
The exclamation mark symbol indicates that the user must read these operating instructions before
commissioning of the device, and observe them during operation.
The „Hand" symbol indicates special advice and operating information.
20