Troubleshooting - Conrad CE 100 Bedienungsanleitung

• Screw the cover caps onto the sensors again. For this, observe that the rubber seal has been inserted cleanly and
is undamaged.
The scope of delivery contains four spare sensor seals (the larger sealing rings).

11. Troubleshooting

With this tyre pressure monitoring system, you purchased a product built to the state of the art and operationally
safe. Nevertheless, problems or errors may occur. The following contains descriptions for the removal of possible
interferences.
Always observe the safety information!
No function, the display does not switch on:
• Switch on the display unit manually by pushing the button DOWN / ON/OFF (2) for a longer time.
• The power supply is interrupted. Connect the connection line to the cigarette lighter.
• The rechargeable battery in the display unit is discharged.
• The cigarette lighter is not supplied with current. The ignition of the vehicle may have to be activated for this.
No sensor value is displayed:
• The battery of the corresponding sensor is discharged. Replace the battery of the corresponding sensor.
• The sensor is not encoded correctly. Recode the corresponding sensor.
A sensor leaks:
• Replace the corresponding sealing ring. The scope of delivery contains sealing rings for the valve (the smaller sealing
rings) and sealing rings for the battery compartment (the larger sealing rings).
Repairs other than those described above must only be carried out by an authorised specialist.
32