Bauknecht BCS7P8PHTSK Bedienungsanleitung Seite 23

Once the function has been activated, the
temperature/grill level can be changed tapping on
button, then using
DURATION
DURATION
When the icon flashes on the display, press
or to set the cooking time you require and
then press to confirm. You do not have to set
the cooking time if you want to manage cooking
manually (untimed): Press
start the function. By selecting this mode, you cannot
program a delayed start.
Please note: You can adjust the cooking time that has been
set during cooking by pressing
amend it and then press
END TIME (START DELAY)
In many functions, once you have set a cooking time
you can delay starting the function by programming
its end time. The display shows the end time while the
icon flashes.
END TIME
Press or to set the time you want cooking
to end, then press
function. Place the food in the oven and close the
door: The function will start automatically after the
period of time that has been calculated in order for
cooking to finish at the time you have set.
Please note: Programming a delayed cooking start time will
disable the oven preheating phase: The oven will reach the
temperature your require gradually, meaning that cooking
times will be slightly longer than those listed in the cooking
table. During the waiting time, you can press
to amend the programmed end time or press
change other settings. By pressing
information, it is possible to switch between end time and
duration.
3. DYNAMIC FUNCTION
These functions automatically select the best cooking
mode, temperature and duration to cook, roast or
bake all the dishes available.
When required, simply indicate the characteristic of
food to obtain an optimal result.
WEIGHT / HEIGHT (ROUND-TRAY-LAYERS)
KILOGRAMS
To set the function correctly, follow the indications on
the display, when prompted, and press
set the required value then press
DONENESS
In some Dynamic functions it is possible to adjust the
doneness level.
to adjust it.
or
or to confirm and
: press or
to confirm.
to confirm and activate the
or
, in order to visualize
or
to confirm.
°C
DONENESS
When prompted, press
desired level between rare (-1) and well done (+1).
Press
4. COOKING WITH STEAM
By selecting the "Steam+ Air" inside the Manual
Functions or one of the several Dynamic dedicated
recipes it is possible cook any kind of food thanks to
the use of the steam. Steam spreads more quickly
and more evenly through food compared to just the
hot air typical of Conventional Functions: this reduce
cooking times, locking in food's precious nutrients
and ensuring you obtain excellent, truly delicious
to
results with all your recipes. Through the complete
duration of the steam cooking the door must be kept
closed.
To proceed with steam cooking, it will be necessary
to provide water to the boiler located inside the oven
using the extractable drawer on the control panel.
When requested on the display with "ADD WATER"
indications, extract the drawer, open drawer's lid
and fill it with water until the level requested on
the display. Close the drawer by pushing it carefully
towards the panel until completely closed. After the
drawer insertion, press START to proceed with the
cooking cycle. The drawer must always remain closed,
except for water filling.
to
After the first filling, in case of longer cooking cycles,
once water will have ran out, it could be necessary to
add it again, in order to complete the cycle: the oven
will prompt it in case it is needed.
Avoid to fill the drawer when the oven is switched off
or up to it is requested from the display. We suggest
to
emptying the drawer after the cooking steam cycle.
5. START THE FUNCTION
At any time, if the default values are those desired or
once you have applied the settings you require, press
to activate the function.
During the delay phase, by pressing
will ask if you want to skip this phase, starting
immediately the function.
or
or to confirm and start the function.
to select the
the oven