Leisure Use - Mini Mobility Set Gebrauchsanweisung

Now pull off the sealant container (1) in the
direction shown by the arrow.
Fit the new sealant container by following
these instructions in reverse.

Leisure use

The bicycle valve adapter B, ball adapter
C and universal adapter D are located on
the underside of the Mobility Set.
The bicycle valve adapter B, ball adapter C and
universal adapter D can be used to inflate bicycle
tyres, balls or small air mattresses, for example.
Ensure that the AIR/REPAIR rotary switch
(1) on the compressor A is set to AIR.
The rotary switch (1) is in this position
when the set is supplied. The sealing
sticker does not have to be removed for
this purpose.
Do not leave the compressor A running
for more than 10 minutes, otherwise the
compressor A may overheat and suffer
damage.
Do not exceed the maximum inflation
pressures of the components since doing
so may damage them and may even
cause injury.
If the inflation pressure is higher than you need it
to be, press the button (1) to let air out.
21