Continuing Your Journey; Changing The Sealant Container - Mini Mobility Set Gebrauchsanweisung

Continuing your journey

Do not exceed the maximum speed of
80 km/h.
Affix sticker with the speed limit to a place
where it is visible for the driver.
Have the defective tyre replaced and balanced
immediately. Contact the nearest MINI Service
Centre and replace the sealant container.
If you use the Mobility Set in conjunction
with a "Tyre Pressure Monitor" (TPM) or
"Tyre Pressure Control" (TPC), please
note that the TPM or TPC will need
to be reset to the correct tyre inflation
pressure after the correction (see section
entitled "Checking the tyre pressure").
Further information is available in the car
owner's manual in the section entitled
"Tyre Pressure Monitor" or "Tyre Pressure
Control".
20
Changing the sealant
container
Please note that the sealant container in
the Mobility Set must be replaced every
four years if it has not been used. The
sealant use-by date can be found on the
underside of the sealant container in the
viewing window on the right-hand side of
the Mobility Set's housing.
Turn the compressor A over and remove the
cover (1) on the underside of the compressor A
by lifting it upwards.
Turn the sealant container (1) upwards until it is
perpendicular to the compressor A.