Conrad GX107 Bedienungsanleitung Seite 97

Deleting all saved zones
The following command deletes all saved zones:
RESET GPSZONE ALL #1513
Deleting one zone
The following command deletes a single zone:
RESET GPSZONE <Zone no.> #1513

After deletion, all remaining zones will advance by one. For example, if zones 1-3
are programmed and zone 2 is deleted, zone 3 is now on memory space 2 and is
thus displayed as zone 2.
Switching zone alarm on and off
SET/RESET GPSZONE #1513
You can control the alarm for GPS zones separately. This way, you can switch off the zone
functions without having to delete the data.
Checking a programmed zone
To check the programmed zone in the specified site, use the command:
TEST GPSZONE <Site no.> #1513
Site no. = values from 1 to 10
Example:
TEST GPSZONE 3 #1513
Answering text message:
GX107 1.XX
GPS zone: 3/7
Latitude:
49.549680N - 49.537480N
Longitude:
011.924780E - 011.957910E
93