General Commands; Status Request - Conrad GX107 Bedienungsanleitung

11. General Commands

In the following examples, it is assumed that the PIN of the SIM card in the "GX107" is "1513".
According to the PIN set by you, you have to replace the "1513" by your own PIN, of course.

11.1 Status Request

You have the option of checking the status of the "GX107" and the parameters. You will receive
a text message informing you of battery condition, GSM reception, out-/input status, voltage,
etc.
Command:
STATUS #1513
Answer:
GX107 1.XX
- - - - - - - - - - - - - - -
Alarm: off
GSM: 90%
Rechargeable Battery: 50%
Area: off
Voltage: 12.2V
ADC: 0.02V
IN1: low
OUT1: off
OUT2: on
INCALL: OUT1 0s
Name, Version SW
Alarm mode on/off
GSM signal strength
Status of the rechargeable battery
Zone monitoring on/off
Voltage of the power supply,
less than 5 V means battery mode!
Voltage at the analogue input or temperature
Condition at input IN1 "low"/"high"
Output 1 on/off (relay)
Output 2 on/off (transistor)
INCALL connected to OUT1, 0=toggle
67