Alarm Mode - Conrad GX107 Bedienungsanleitung

11.2 Alarm Mode

The "GX107" has several trigger options to alarm the user by text message and email. The
following command permits central control of the alarm functions.
Only "ENABLE" will permit the "GX107" to independently send a text message and email to the
numbers/addresses saved for set and recognised events.
With "DISABLE", the "GX107" will only generate a text message to the phone number that
previously sent a text message with the correct PIN.
Command to activate the alarm mode:
ALARM ENABLE #1513
Command to deactivate the alarm mode:
ALARM DISABLE #1513
After deactivating the alarm mode ("DISABLE"), the "GX107" will no longer send any alarm
messages. You will then only receive the answering text message to your sent command.
If the alarm mode is activated ("ENABLE"), the "GX107" will transmit independently again.
68