Conrad GX107 Bedienungsanleitung Seite 70

Examples:
Switch on output 1 (if the PIN of the "GX107" is 1513):
SET OUT1 #1513
Set language (German):
SET LANGUAGE DE #1513
Note on the RESET command:
If you want to switch off a function or reset it due to an error, send a RESET text message
command with the matching function word (2nd word):
RESET <Function> #PIN
This command works universally for all functions/text message commands!
Example: Switching off output 1:
RESET OUT1 #1513
More information:
• Capitalisation is not relevant; you may use capital and small letters as you wish.
• Every new command of the same type (2nd word) will overwrite the previous settings.
• After every text message command, the "GX107" will send you an text message answer to
confirm programming to your mobile phone (if the PIN in the text message command was
correct).
Button for manual reset:
If the device no longer reacts, you can manually reset it. Press the "RESET" button (11).

The settings made before are not deleted.
66