Error Description - Spengler Neotens Nomad Neo100 Gebrauchsanweisung

Error Description

Code Type
The device is not
E01 Warning
working properly.
The deflation
E02 Error time of the cuff is
too long.
The pressure
E03 Error detected exceeds
300 mmHg
Abnormal mea-
E04 Warning
surement data
The inflation
speed of the wrist
E05 Warning
cuff does not
meet standards
Cannot complete
E06 Warning the measurement
normally
Measurement
E07
Warning data exceed the
standard range
E08 Error Low battery
68
MANUEL UTILISATEUR NEOTENS NOMAD | WWW.SPENGLER.FR
Description of
Issue
Place the device on the wrist again and
check that it is working properly.
Please place the device on the wrist again,
perform a new measurement and check if
the pressure is correct
Please place the device on the wrist again,
perform a new measurement and check if
the pressure is correct.
Please check the wrist cuff is worn proper-
ly before re-measuring.
Please check the wrist cuff is worn proper-
ly before re-measuring.
Please check the wrist cuff is worn proper-
ly before re-measuring.
Please readjust the wrist cuff and take an-
other measurement. If the problem is not
solved, please contact the manufacturer.
Replace batteries.
Possible Causes and Solutions