RCB RK15 Originalbetriebsanleitung Seite 66

6. SEAT PACKAGE TAIL LIGHT INSTALLATION
1
1. Adjust the direction of the quick release lever of the seat tube and pull it apart as
shown in the figure.
2. Use a screwdriver to loosen the tail light
screw, insert the tail light bundle into the seat
tube at an appropriate angle and align it, and
tighten the screw.
Note: The depth of inserting the seat tube
should be buried above the safety mark.
4. Press the quick release lever in the direction shown in the figure.
Note: If the folding wrench is too tight or too loose, please adjust the screw at
position "1" appropriately.
Deutsch /
2
English / Français / Español / Italiano / Nederlands / Polski
3. Insert the seat tube and adjust it to
the required height (note: the depth of
inserting the seat tube should be buried
above the safety mark).
4
(63)
3