RCB RK15 Originalbetriebsanleitung Seite 64

4. Insert the quick release lever.
6. Screw on the quick release
lever nut as shown in the figure.
4. FOOT PEDAL INSTALLATION
Deutsch /
3
6
Right Pedal
Left Pedal
English / Français / Español / Italiano / Nederlands / Polski
4
5. Install the conical spring with the small
end facing inward as shown in the figure.
7. Adjust the direction of the lever, adjust the
appropriate screw tightness, and tighten the
lever upwards.
Note: during this process, ensure that the
front wheels are in the center of the front fork
tube. If there is any deviation, please loosen
the lever to adjust the position of the front
wheels, and then tighten the lever.
The "R" mark on the foot pedal axis
indicates the right foot pedal, The
label "L" represents the left foot pedal.
(61)
3. Unscrew the quick
release lever nut
and take out one
conical spring.
5
7