RCB RK15 Originalbetriebsanleitung Seite 65

1
Installation method for right foot step:
The "R" mark on the foot pedal represents the right foot pedal. First, use your hand
to rotate the foot pedal
disc on the right side and tighten it by rotating it
wrench.
4
Installation method for left foot pedal:
The "L" mark on the foot pedal represents the left foot pedal. First, use your hand to
rotate the foot pedal
use a No. 15 open-ended wrench to rotate
reinforcement.
5. REAR FENDER INSTALLATION
1. Loosen the bracket screws, install the
bracket on the frame and place it directly
behind, and then tighten the screws with
a screwdriver.
Deutsch /
2
clockwise and pre tighten it insert the crank with the toothed
counterclockwise and pre tighten it into the left crank, and then
English / Français / Español / Italiano / Nederlands / Polski
clockwise with a No. 15 open-ended
5
counterclockwise
1
(62)
3
and tighten it for