General Description; Scope Of Delivery; Functional Description; Overview - FLORABEST FGH 750 A1 Originalbetriebsanleitung

This tool is intended for use by adults.
Children and persons unfamiliar with the
manual must not be allowed to use the
tool. Do not use the tool in rain or damp
surroundings.
The manufacturer shall not be held liable
for damage arising from improper use or
incorrect operation of the tool.

General description

The major functional parts are
shown on the foldout pages.

Scope of delivery

Carefully remove the tool from the packag-
ing and check that the following parts are
complete:
• Motor housing with tines and frame
tubing
• Right-hand fork with dead-man lever
and permanently fixed mains cable
• Left-hand fork grip
• Plastic cross-plate with cable guide
• Assembly tools, cable clip and belt clip
• Translation of the original instructions
for use

Functional description

Your hand-operated garden tiller is
equipped with a maintenance free electric
motor and a gearbox with sump lubrica-
tion.
The tool is fitted with four rotating tine
wheels that automatically dig themselves
into the ground.
The aluminium frame can be folded to aid
storage.
Please refer to the following descriptions
for the function of the controls.
IB_270725_FGH750A1_CB-4_rev02_20151130-ts.indb 5

Overview

1a Right-hand fork grip with dead-
A
man lever, safety release catch
and cable tension relief
1b Left-hand fork grip
2 Mains cable
3 Plastic cross-plate
4 Two central tubes
5
6 Frame tubing
7 Vent
8 Motor housing
9 Gearbox
10 Driveshaft
11 Tines
12 Belt clip
13 Bolts provided
B
14 Screws
15 Wing nuts
16 Cable tension relief
C
17 Safety release catch
18 Dead-man lever
19 Hex bolt
D
20 Self-locking nut

Technical data

Garden Cultivator .................. FGH 750 A1
Motor power input ...................... 750 W
Rated input voltage ..........230 V~, 50 Hz
Leerlaufdrehzahl (n ) ..................350 min
0
Safety class ......................................
Degree of protection .........................IPX4
Working width ..........................360 mm
Max working depth ............max. 180 mm
Number of tine wheels ..........................4
Weight ...................................... 7.7 kg
Acoustic pressure level
(L ) .............. 81,4 dB (A), K
pA
GB
-1
II
= 2,5 dB
pA
5
01.12.15 08:47