General Description; Scope Of Delivery; Overview - FLORABEST FLV 1200 B1 Originalbetriebsanleitung

familiar with these Instructions must not be
allowed to use this implement. Never
operate this implement while it is raining
and in a wet environment.
The owner or operator is responsible for
accidents or harm to people and their
property.
The manufacturer cannot be held liable for
damage caused by incorrect operation of
the implement or if it is not used in
conformity with its intended purpose.

General description

Scope of delivery

Carefully unpack the implement and check
that all the subsequently listed parts are
complete:
• Implement case with verticuttor cylinder
and impact protector
• Aerating cylinder
• Upper handle bar complete with starting
lever, power plug, unlocking button and
firmly mounted power cable
• Lower bar
• 2 centre bars
• Collection bag
• Cable strain relief
• 2 cable clips
• Mounting accessories:
- 2 Philips screws, 4 screws and 4
wing nuts to fasten the bar
- Spanner to change the cylinders
• Instruction Manual

Overview

The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.
1 Unlocking button
A
2 Starting lever
3 Upper handle bar
4a+b 4 screws and 4 wing nuts to
secure the bar
5 Collection bag
6 Impact protector
7 Lower bar
8 Implement case
9 Adjustment wheel
10 2 rear wheels
11 2 front wheels
12 Cable clip
13 Spanner
14 Tool holder
15 2 centre bars
16 Cable clip
17 Power cable
18 Cable strain relief
19 Machine cable
20 Aerator cylinder with sprung
tines
21 Verticutor cylinder with knives
B
22 Philips screws
C 23 Collection bag frame
E 24 Square receptacle
GB IE
5