Adjusting Trimmer For User; Removing And Fitting The Battery; Inserting The Battery; Switching The Trimmer On/Off - Stihl Fsa 110.0 R Gebrauchsanleitung

9 Adjusting Trimmer for User

1 2
3
4
► If the release button (1) is not pressed: Press
the release button (1) until it engages.
► Push the mowing head (4) onto the shaft (3)
and press it against the fanwheel (2).
The mowing head engages with a click.
The release button pops out, and the mowing
head fits flush against the fanwheel.
► If the mowing head does not engage: Press
the mowing head against the fanwheel and
rotate it until it engages.
8.3.2 Removing the mowing head
► Switch off the brushcutter and remove the bat‐
tery.
► Hold the mowing head firmly with one hand.
► With the other hand, press the release button
until it engages.
The mowing head pops up from the shaft and
can be removed.
9 Adjusting Trimmer for User
9.1 Adjusting and setting the loop
handle
The loop handle can be set to different positions
to suit the height and reach of the user.
► Switch off the brushcutter and remove the bat‐
tery.
3
► Release the quick release clamp (2).
► Move the loop handle (1) to the required posi‐
tion and check that the following conditions
are met:
– The bump guard (3) fits between the loop
handle (1) and the control handle.
– The distance (a) of no more than 30 cm is
not exceeded.
0458-064-9601-A
a
1
2
► Close the quick release clamp (2) so that the
loop handle (1) cannot be rotated on the shaft
any longer.
10 Removing and Fitting the
Battery
10.1

Inserting the Battery

1
2
► Insert the battery (1) into the battery compart‐
ment (2) as far as it will go.
The battery (1) engages with a click and is
now locked.
10.2 Removing the battery
► Keep one hand in front of the battery compart‐
ment so that the battery (2) cannot fall out.
1
► Press both locking levers (1).
The battery (2) is now unlocked and can be
removed.
11 Switching the Trimmer
On/Off
11.1 Switching on the brushcutter
English
1
2
1 2
4 3
33