You Will Need (For Use With The Parkside App); Parkside App; Requirements; Activating/Deactivating The Bluetooth ® Function On The Battery - Parkside Performance Pabsp 20 Li C4 Bedienungsanleitung Und Originalbetriebsanleitung

The LED work light
is intended to illuminate the immediate
work area .
Any other use or modifi cation of the
product are considered improper use
and can result in hazards such as
death, life-threatening injuries and
damage . The manufacturer is not liable
for any damages caused by improper
use . The product is not intended for
commercial use or for any other use .
The PARKSIDE app can be
used with this product when
a PARKSIDE Smart Battery
is installed .
˜ You will need (for use with the

PARKSIDE App)

Mobile device:
iOS 15 .0 or higher
Android 6 .0 or higher
˜ PARKSIDE app
Using the PARKSIDE app, you can
o
monitor the product and control certain
functions of the product . The extent
of controlling those functions may be
changed with fi rmware updates. For
detailed information on the PARKSIDE
app, see the user manual for the
Smart battery .
˜ Requirements
In order to search, locate and connect
o
to the PARKSIDE app, the following
requirements must be met:
– The PARKSIDE app is installed on
your smartphone and Bluetooth
is activated .
– PARKSIDE Smart battery,
model number PAPS 204 A1
or PAPS 208 A1, is attached to
the product .
8 GB
on this product
11 ] [
®
– The Smart battery is paired with the
PARKSIDE app .
– The product can communicate
with the PARKSIDE app via the
Smart battery .
˜ Activating/deactivating the
Bluetooth function on the
®
battery
Activate the Bluetooth
o
Press and hold the
the battery pack
The orange LED of the charging level
LEDs lights up . The Bluetooth
14 ] [
function is activated .
Release the
Deactivate the Bluetooth
o
Press and hold the
the battery pack
The orange LED of the charging level
LEDs goes off . The Bluetooth
[ 14 ]
function is deactivated . In the
PARKSIDE app the product is shown
as offl ine.
˜ Connecting the product to
the PARKSIDE app
1 . Press and hold the
the battery pack
activate the Bluetooth
2 . Enable the Bluetooth
your smartphone .
3 . Open the PARKSIDE app .
Connecting the product for the fi rst
time to the PARKSIDE app
1 . Select {Add a tool}
tools} tab. The PARKSIDE app scans
the area for available devices . The
PARKSIDE app indicates if available
devices have been found .
2 . Tap on the product name to select the
battery pack .
[ 10 ]
function:
®
button on
13 ] [
for 3 seconds .
[ 10 ]
®
button .
13 ] [
function:
®
button on
[ 13 ]
for 10 seconds .
[ 10 ]
®
button on
[ 13 ]
for 3 seconds to
[ 10 ]
function .
®
function on
®
or on the {Your