Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Carefully open the packaging and remove the parts included inside.
• Place them on the floor on a rug or a piece of plastic large enough to prevent any damage.
• Check that the objects listed below are inside the packaging.
Mounting bracket
Motor
Connection panel
1. Bottom Light
2. ON/OFF button
3. Reverse function
4. Timer
5. Color temperature control
6. Fan intensity control
7. Body Light
8. Sound off button
9. Batteries (2 x AAA)
Controller pairing
1. Turn off the main light switch in the room where you have installed your fan for at least 10
seconds.
2. Turn the switch on and you will hear a beep, within 3 seconds, press and hold the on/off
button until you hear a beep.
3. If the pairing process is unsuccessful, repeat the above steps again after turning off the
wall switch for at least 1 minute.
E NGL I SH
8
LIST OF PARTS
Blades
Upper deck
Decorative screen
REMOTE CONTROL
Screws
Command & Driver
LED panel
Werbung
