Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. SAFETY
1.1 Identification of warnings
Meaning
DANGER
This term defines a high risk of
danger, which can lead to death
or serious injury, if not avoided.
WARNING
This term defines a medium
risk of danger, which can lead
to serious or minor injury, if not
avoided.
NOTICE
This term characterises dangers
to the machine and its proper
operation.
Warning of a general danger.
The danger is specified by
indications given in the table.
This
dangers
the
information
protection.
1.2 General points
The operation manual at hand
provides basic notes which have to be
taken into account during assembly,
operation and maintenance works.
Therefore, before assembly and
commissioning,
manual has to be read by the
assembler as well as the responsible
personnel/operator at all costs. It
always has to be available on site of
operation of the machine/plant.
The general safety notes listed
under the main point safety are
not the only notes to be taken into
account. Please also observe the
specific safety instructions, such as
those for private use, listed under
other main points.
1.3 Intended use
Only use the pump in the fields
of application described in this
documentation.
symbol
characterises
associated
voltage
and
provides
on
voltage
this
operation
• The pump must only be operated
in technically perfect conditions.
• Do not operate the pump partially
assembled.
• The pump must only pump
the
fluids
documentation.
• The pump must never operate
without pumped fluid.
• Never exceed the usage limits
defined in the documentation.
• The safe operation of the pump is
only ensured if it is used as described
in this manual.
1.4 Personnel qualifications
with
and training
The personnel responsible for
operation, maintenance, inspection
and assembly have to have the
corresponding
for those types of work. Area of
responsibility, competence and the
surveillance of the personnel have
to be regulated precisely by the
operator. If the personnel do not
possess the necessary knowledge,
they have to be trained and
instructed.
Furthermore the operator has to
make sure that the personnel have
completely understood the content
of the operation manual.
1.5 Safety-awareness at work
The safety instructions described
in this Operating Manual, the valid
national regulations on accident
prevention, and possible internal
regulations of the customer on
work, operation and safety are to
be observed.
It is imperative to observe signs that
13
described
in
qualifications
this
Werbung
