ON/OFF AND MENU BUTTON
• When you plug in the machine and the display shows "OFF", press and hold the button
for 3 seconds to turn it on and enter standby mode. "---" will appear on the screen.
• In standby mode, press the key
• In working mode, press and hold the key
• In standby mode, press and hold the key
TIMER BUTTON
• In standby mode, select the key
a minimum of 1 hour and a maximum of 12 hours. After the programmed time has elapsed,
the slush machine will automatically start operation.
TEMPERATURE CONTROL
• If you want to sip the iced drink, lower the temperature with the right button on the control
panel.
.
• For thicker, colder iced drinks, increase the temperature level by pressing the sign
the control panel.
NOTE: The temperature can only be changed within a preset mode and can only be increased
or decreased by one level, which is equivalent to approximately 1°C (1.8°F) of variation.
CLEANING BUTTON
• In standby mode, press the button
mixing auger operates; the compressor remains deactivated. The mixer is kept rotating
for 3 minutes.
NOTE: Ensure the machine has been in an upright position for at least 2 hours before first
use, so that the refrigerant can settle in the condenser for optimal and safe use.
1. Plug the slush machine into an appropriate electrical outlet.
2. Open the fuel tank filler cap.
3. Add liquids through the filling cap and close it.
4. "OFF" will appear on the screen, indicating that the machine is off.
5. Press and hold the button
the screen.
6. Press the key
temperature setting. Wait for 3 seconds and the machine will enter working mode.
7. The machine will begin cooling to the preset or optimal temperature to achieve an ideal
texture. If you prefer, you can adjust the temperature with the buttons
the perfect consistency of your frozen drink.
8. The temperature control LED will light up and flash slowly as the beverage reaches the
selected temperature. When the desired temperature is reached, the LED will remain lit,
E NGL I SH
10
USING THE CONTROL PANEL
to select the desired function.
to program the delayed start time. This can be set with
PREPARATION OF FROZEN DRINKS
for 3 seconds to enter standby mode. "---" will appear on
to select the desired function. Each function corresponds to a different
to exit work mode and enter standby mode.
to turn off the machine.
to activate cleaning mode. In this mode, only the
in
and
to get