If the rubber ring on the lid fell off during use or is worn and you wish to replace it, please
follow the steps below:
1. Unscrew the cap head, prepare pliers and a new rubber ring.
2. Remove the old rubber ring from the inner bore of the cap head with the help of the pliers.
3. Place the new rubber ring into the bore of the cap head with the pliers.
4. Once you have checked that the new rubber ring has been fitted correctly, reattach the lid
head to the machine.
Cleaning of the machine:
• Wipe with a damp cloth and use a little mild detergent if necessary.
• Do not use any solvents or abrasive detergents that may corrode the surface of the machine.
• Then dry with a dry cloth.
Bottle and cap:
• The plastic bottle and its cap are not dishwasher safe.
• Use warm water (max. 40°C) with a mild detergent for cleaning. If you use a brush, make
sure it is suitable for cleaning plastic bottles and does not leave scratches on the surface
of the bottle.
• Do not use solvents, strong detergents or cleaners containing abrasive substances.
• Carefully wash the bottle regularly. It is recommended to wash the inside of the bottle with
clean water and dry it after each use.
• Keep bacteria and odours away by keeping the bottle clean and storing it with the cap
unscrewed.
• If you are not going to use the bottle in the short term, keep the cap open to allow the inside
to dry out completely.
• The ambient temperature of the bottle must not exceed 40ºC.
• Our packaging materials are recyclable, please dispose of the packaging materials in the
appropriate recycling containers in order to protect the environment.
• If you wish to dispose of the appliance, choose an environmentally friendly way. Do not dis-
pose of it in household waste. Contact your local authorities for more detailed information
on recycling.
• The PET bottle is 100% recyclable. When you want to dispose of it, please recycle it in the
appropriate container.
E NGL I SH
10
REPLACE RUBBER RING
CLEANING AND MAINTENANCE
DISPOSAL OF THE PRODUCT