Parkside PART 20-Li A1 Originalbetriebsanleitung Seite 25

Guaranteed sound power level
L in dB.
WA
96
Keep persons in the vicinity
away from the device
Risk of injury due to ejected
parts!
Symbols used in the instruction
manual
Attention!
Safe operation of lawn
trimmers
General Information
• Read the instruction manual care-
fully. Familiarise yourself with the
controls and how to use the device
correctly.
• This device is not intended for use
by children, individuals with limited
physical, sensory or mental cap-
abilities, those with insufficient ex-
perience or knowledge or individu-
als who are not familiar with the in-
structions. Children should be su-
pervised to ensure that they do not
play with the device. Cleaning and
maintenance must not be carried
out by children.
• Local regulations may specify an
age limit for the user.
• The machine must not be used at
altitudes over 2000 m.
• Note that the user is responsible
for any accidents or risks to others
and their property.
• Observe noise protection rules and
other local regulations.
• Never use the device if there are
people, in particular children, or
animals nearby.
Preparation
• Never use the device with dam-
aged or missing guards or protect-
ive covers .
• Before using the device, always
perform a visual check for dam-
aged, missing or incorrectly in-
stalled safety devices and protect-
ive covers.
• Before operating the machine and
after any impact, check the device
for signs of wear or damage and
have any necessary repairs carried
out.
Operation
• Wear eye protection, long trousers
and sturdy shoes throughout the
period of machine use.
• Pay attention, be aware of what
you are doing and take the utmost
care when working with the device.
Do not use the device if you are
tired or you are under the influence
of drugs, alcohol or medication.
• Use the machine only in daylight or
with good artificial lighting.
• Operation of the device in bad
weather is to be avoided, espe-
cially if there is a risk of lightning.
• Avoid operating the device when
the grass is wet.
• Do not work on overly steep
slopes.
• Always keep your hands and feet
away from the cutting equipment,
especially while starting the motor.
• Warning! Do not touch moving
dangerous parts until the battery
has been removed and the moving
dangerous parts have come to a
complete stop.
• Never replace the non-metallic
cutting unit with a metallic cutting
unit.
GB MT
25