Transportation And Storage; Know Your Product; Guaranteed Sound Power Level - Ryobi Rlt4125 Bedienungsanleitung

TRANSPORTATION AND STORAGE

■ Turn off the product, disconnect it from the power supply,
and allow it to cool down before storing or transporting.
■ Remove all foreign materials from the product.
■ Store the product in a cool, dry, and well-ventilated place
that is inaccessible to children. Keep the product away
from corrosive agents, such as garden chemicals and
de-icing salts. Do not store the product outdoors.
■ For transportation in vehicles, secure the product
against movement or falling to prevent injury to persons
or damage to the product.
MAINTENANCE
■ Use only original manufacturer's replacement parts,
accessories, and attachments. Failure to do so can cause
possible injury, can contribute to poor performance, and
may void your warranty.
■ Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. Have
the product serviced by an authorised service centre only.
■ Turn off the product and disconnect it from the power supply
before conducting any maintenance or cleaning work.
■ You may make adjustments or repairs described in this manual.
For other repairs, contact an authorised service centre.
■ For the replacement line, use only a nylon filament line of the
diameter described in the specifications table of this manual.
■ After each use, clean the product with a soft, dry cloth.
Any part that is damaged should be properly repaired or
replaced by an authorised service centre.
■ Check all nuts, bolts, and screws before each use and
at frequent intervals for proper tightness to ensure that
the product is in safe working condition. Any part that is
damaged should be properly repaired or replaced by an
authorised service centre.
■ Bring the product to an authorised service centre to
replace damaged or unreadable labels.

KNOW YOUR PRODUCT

See page 102.
1. Rear handle
2. On/Off trigger
3. Cord hook
4. Power cord retainer
5. Handle adjustment button
6. Edging button
7. Front handle
8. Upper shaft
9. Telescoping sleeve
10. Lower shaft
11. Spool cover
12. Spool
13. Slider
14. Cutting line
15. Cut-off blade
16. Safety guard
17. Screw
18. Operator's manual
19. Screwdriver
SYMBOLS
Safety alert
Read and understand all instructions
before operating the product. Follow all
warnings and safety instructions.
Wear eye, ear, and head protection.
Wear non-slip, heavy-duty gloves.
Wear non-slip, safety footwear when
using the product.
Do not use metal blades on the
product.
Do not expose the product to rain or
damp conditions.
Disconnect the plug from the power
outlet immediately before maintenance
or if the cable is damaged or cut.
Beware of thrown or fl ying objects.
Keep all bystanders, especially
children and pets, at least 15 m away
from the operating area.
Keep hands away from the cut-off
blade.
Class II: Protection against electric
shock rely on double insulation or
reinforced insulation.

Guaranteed sound power level

Do not dispose of waste electrical
and electronic equipment as unsorted
municipal waste. Waste electrical
and electronic equipment must be
collected separately. Waste light
sources have to be removed from
the equipment. Check with your local
authority or retailer for recycling advice
and collection point. According to local
regulations, retailers may have an
obligation to take back waste electrical
and electronic equipment free of
charge. Your contribution to the reuse
and recycling of waste electrical and
electronic equipment helps to reduce
the demand of raw materials. Waste
electrical and electronic equipment
contain valuable and recyclable
materials, which can adversely impact
the environment and the human health
if not disposed of in an environmentally
compatible manner. Delete personal
data from waste equipment, if any.
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
5