Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Proper use
The compressor is used to generate compressed air for pneumatically powered tools that
can be operated with an air rate of up to 85 l/min. (e.g. tyre inflaters, air blow guns). Due to
the limited air flow rate, it is not possible to operate tools with a very high compressed air
consumption (e.g. orbital sanders, straight grinders and impact screwdriver).
The compressor may only be operated in a dry and well ventilated indoor space.
The machine may only be used in the intended manner. Any use beyond this is improper.
The user/operator, not the manufacturer, is responsible for damages or injuries of any type
resulting from this.
Please note that our equipment was not designed with the intention of use for commercial
or industrial purposes.
We assume no guarantee if the device is used in commercial or industrial applications, or
for equivalent work.
5. Safety instructions
m Attention! The following basic safety measures must be observed when using this com-
pressor for protection against electric shock, and the risk of injury and fire.
Read and observe these instructions before using the device.
Safe work
1. Keep the work area orderly
- Disorder in the work area can lead to accidents.
2. Take environmental influences into account
- Do not expose electric tools to rain.
- Do not use electric tools in a damp or wet environment. There is a risk of electric shock!
- Make sure that the work area is well-illuminated.
- Do not use electric tools where there is a risk of fire or explosion.
3. Protect yourself from electric shock
- Avoid physical contact with earthed parts (e.g. pipes, radiators, electric ranges, cooling
units).
4. Keep away from children!
- Do not allow other persons to touch the equipment or cable, keep them away from your
work area.
5. Securely store unused electric tools
- Unused electric tools should be stored in a dry, elevated or closed location out of the
reach of children.
www.scheppach.com
GB | 41
Werbung
