Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mounting Precautions (For SHARP
dealers and service engineers)
Please read "Safety Precautions and Maintenance" carefully before installation.
Mounting the monitor requires expertise and the work must be carefully performed by a
trained service person in accordance with the section.
Please note the following when mounting on a wall or ceiling:
•
We recommend mounting interfaces that comply with UL1678 standard in
North America.
•
For detailed information, refer to the instructions
included with the mounting equipment.
We strongly recommend using the screws as shown
below.
If using screws longer than below mentioned, check the
depth of the hole.
•
This monitor and bracket must be installed on a wall
which can endure at least 4 times or more the weight of
the monitor. Install by the most suitable method for the
material and the structure.
•
Do not use an impact driver.
•
After mounting, please carefully ensure the monitor is
secure, and not able to come loose from the wall or
mount.
Screw Size
Model
(A)
PN-M552
PN-P556
M6
(4 pcs)
PN-M652
PN-P656
Bracket Hole
(B)
10-12 mm
≤ Ø 8.5 mm
(3/8-1/2 inch)
(5/16 inch)
Unit
No thread
C
No Thread
(C)
(D)
2 mm
(1/16 inch)
Gap
Gap
Mounting
Bracket
Washers
D
A
B
Thickness of
bracket and
washers
Recommended
Fasten Force
390-670 N•cm
19
E
Werbung
