Sharp MultiSync PN-M652 Installationsanweisung Seite 21

nOperations after first power-on
When you turn on the power for the first time, the initial setting screen appears. Navigate
the cursor to [Start] using the ▲/▼ buttons on the remote control unit and press the SET
button to start. Configure the initial settings, such as setting the language, date and time,
etc.
Turning power off
1. Press the POWER button again on the monitor or press the STANDBY button on
the remote control unit. The power is turned off. (Standby state)
Model
Power requirement AC 100 - 240 V,
Operating
temperature*
1
Operating humidity
Operating altitude
Storage
temperature
Storage humidity
Power
consumption*
2
(Max/networked
standby mode* /
3
standby mode* /
4
off mode)
Dimensions
(excluding
protrusions)
inch (mm)
Weight lbs. (kg)
* : Temperature condition may change when using the monitor together with the optional equipments
1
recommended by SHARP. In such cases, please check the temperature condition specified by
the optional equipments.
* : Factory setting. (When no optional part is attached.)
2
* : When no optional part is attached. Time for power management function: 20 sec.
3
Only when the input is USB-C (upstream), time for power management function: 3 min.
* : When no optional part is attached. Time for power management function: 3.5 min.
4
Specifications
PN-M652
AC 100 - 240 V,
4.6 A - 1.9 A, 5.0 A - 2.1 A,
50/60 Hz
32 °F to 104 °F (0 °C to 40 °C)
20% to 80% (no condensation)
-4 °F to 140 °F (-20 °C to 60 °C)
10% to 80% (without condensation)
135 W
(400 W/2.0 W/ (435 W/2.0 W/
0.5 W/0.0 W) 0.5 W/0.0 W)
Approx. 57-1/4 (W) x
2-5/16 (D) x 32-3/4 (H)
(1454.5 x 59.5 x 832.4)
Approx. 57.3 (26.0)
PN-P656 PN-M552
AC 100 - 240 V,
4.0 A - 1.7 A,
50/60 Hz 50/60 Hz
3000 m or less
160 W 105 W
(355 W/2.0 W/
0.5 W/0.0 W)
2-5/16 (D) x 27-15/16 (H)
(1235.6 x 59.5 x 709.3)
PN-P556
AC 100 - 240 V,
4.1 A - 1.7 A,
50/60 Hz
115 W
(365 W/2.0 W/
0.5 W/0.0 W)
Approx. 48-5/8 (W) x
Approx. 45.2 (20.5)
17
E