Werbung
Verfügbare Sprachen
Verfügbare Sprachen
nFor Trained Installers
For SHARP dealers or service engineers, please confirm "Mounting Precautions
(For SHARP dealers and service engineers)".
Carefully inspect the location where the unit is to be mounted. Not all walls or ceilings are
capable of supporting the weight of the unit. The weight of this monitor is provided in the
specifications. Product warranty does not cover damage caused by improper installation,
re-modeling, or natural disasters. Failure to comply with these recommendations could
result in voiding the warranty.
To ensure safe installation, use two or more brackets to mount the unit. Mount the unit to
at least two points on the installation location.
Allow for adequate ventilation or provide air conditioning around the monitor, so that heat
can properly dissipate away from the monitor and from the mounting equipment.
nVentilation Requirements
When mounting in an enclosed space or recessed area, leave adequate room between
the monitor and the enclosure to allow heat to disperse, as shown below.
NOTE:
• Allow adequate ventilation or provide air conditioning around the monitor,
so that heat can properly dissipate away from the unit and the mounting
equipment; especially when you use monitors in a multiple screen
configuration.
• This monitor has internal temperature sensors.
If the monitor overheats, a "Caution" warning appears. If the "Caution" warning
appears, stop using the unit, turn off the power and allow it to cool.
• This monitor should be used at an ambient temperature between 32°F (0°C)
and 104°F (40°C). Provide enough space around the monitor to prevent heat
from accumulating inside.
• Temperature condition may change when using the monitor together with the
optional equipments recommended by SHARP. In such cases, please check the
temperature condition specified by the optional equipments.
For the monitor in landscape orientation
10
E
≥ 100 mm (3-15/16 inch)
≥ 100 mm (3-15/16 inch)
<104 °F (40 °C)
≥ 30 mm
(1-3/16 inch)
Werbung
