Herunterladen Diese Seite drucken

Sharp MultiSync PN-M652 Installationsanweisung Seite 11

Grossformatbildschirm
Vorschau ausblenden Andere Handbücher für MultiSync PN-M652:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 71
Securely fasten the Option Board.
Ensure the Option Board is securely fastened using the original screws
to prevent the Option Board from falling out the product. A falling Option
REQUIRED
Board may expose you to danger.
Usage of the product must not be accompanied by fatal risks or dangers
that, could lead directly to death, personal injury, severe physical damage
or other loss, including nuclear reaction control in nuclear facility, medical
PROHIBITED
life support system, and missile launch control in a weapon system.
Handling the power cord.
The monitor should be installed close to an easily accessible power outlet.
REQUIRED
When connecting the power cord to the product's AC input terminal, make
sure the connector is fully and firmly inserted.
An incomplete connection of the power cord may cause overheating of the
plug; it allows dust to get on the plug connection, which can lead to a fire.
Touching the pins of a partially inserted plug may lead to an electric shock.
REQUIRED
If a cable clamp and a screw are provided with the product, fasten the
power cord to the product by attaching them to prevent a loose connection.
Handling the power cord by following below to avoid fire or electric shock.
• When connecting or disconnecting the power cord, pull the power cord
out by holding onto its plug.
• Unplug the power cord from the power outlet before cleaning the
product or when not planning to use the product for an extended time.
REQUIRED
• When the power cord or plug is heat or damaged, unplug the power
cord from the power outlet, and contact a qualified service person.
Regularly dust off the power cord by using a soft dry cloth.
REQUIRED
Before moving the product, make sure the product power is off, then
unplug the power cord from the power outlet and check that all cables
connecting the product to other devices are disconnected.
REQUIRED
Do not use the power cord with a power tap.
Adding an extension cord may lead to fire as a result of overheating.
PROHIBITED
Do not bind the power cord and the USB cable.
It may trap heat and cause a fire.
PROHIBITED
WARNING
CAUTION
7
E

Werbung

loading