Herunterladen Diese Seite drucken

Emptying The Grass Catcher Box - Stihl Rma 248.3 Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für RMA 248.3:
English
– 70 mm = position 5
– 85 mm = position 6
– 100 mm = position 7
The positions are indicated on the lawn mower.
Setting the cutting height
► Switch the lawn mower off.
The blade must not be turning.
► Place the lawn mower on a level surface.
► Hold the lawn mower at handle (1).
► Press and hold lever (2).
► Move the lawn mower to the desired position
by raising and lowering the lever.
The current cutting height can be read off at
cutting height indicator (3) by means of mark‐
ing (4).
► Release lever (2).
The lawn mower engages.
12.3
Mowing and Mulching
The lawn mower is equipped with a multi-blade
and can be used for mowing or mulching.
► Push the lawn mower forwards slowly and in a
controlled manner.
► If a foreign object is hit during mowing or
mulching and the blade is blocked:
► Switch the lawn mower off and remove the
battery.
► Make sure that all moving parts have come
to a complete stop.
► Check the lawn mower.
► If repairs are required: consult a STIHL spe‐
cialist dealer.
► If the lawn mower begins to vibrate strongly:
► Switch the lawn mower off and remove the
battery.
46
12 Operating the Lawn Mower
► Check the lawn mower.
► Check that all nuts, bolts, screws and pins
are tight.
► If repairs are required: consult a STIHL spe‐
cialist dealer.
For optimum performance, note the recommen‐
ded temperature ranges,
12.4
Emptying the Grass Catcher
Box
The flow of air generated by the blade raises
level indicator (1). The flow of air stops when the
grass catcher box is full. If the flow of air is too
low, level indicator (2) returns to its resting state.
This is a prompt to empty the grass catcher box.
The functionality of the level indicator is restric‐
ted if the flow of air is impaired. External influen‐
ces such as wet, dense or high grass, low cutting
levels, dirt or the like can impair the flow of air
and the functionality of the level indicator.
► If the level indicator drops to its resting state:
empty the grass catcher box.
► Switch the lawn mower off.
► Detach the grass catcher box.
► Open tab (1).
► Open and hold upper part of grass catcher
box (2) by handle (3).
► Hold lower handle (4) with the second hand.
► Empty the grass catcher box.
► Close the grass catcher box.
► Attach the grass catcher box.
20.7.
0478-131-9800-B
loading

Diese Anleitung auch für:

Rma 243.3Rma 253.3Wa200111410Wa210111420