Warranty - Riester R1 Shock-Proof Gebrauchsanweisung

Warranty

This product has been manufactured under the stric-
test quality standards and has undergone a thorough
final quality check before leaving our factory.
We are therefore pleased to be able to provide a war-
ranty of
2 years from the date of purchase
on all defects, which can verifiably be shown to be due
to material or manufacturing faults. A warranty claim
does not apply in the case of improper handling.
All defective parts of the product will be replaced or
repaired free of charge within the warranty period. This
does not apply to wearing parts.
For R1 shock-proof, we grant an additional warranty of
5 years for the calibration, which is required by CE-cer-
tification.
A warranty claim can only be granted if this Warranty
Card has been completed and stamped by the dealer
and is enclosed with the product.
Please remember that all warranty claims have to be
made during the warranty period.
We will, of course, be pleased to carry out checks or
repairs after expiry of the warranty period at a charge.
You are also welcome to request a provisional cost
estimate from us free of charge.
In case of a warranty claim or repair, please return the
RIESTER product with the completed Warranty Card to
the following address:
Rudolf Riester GmbH
Dept. Repairs RR
Bruckstr. 31
72417 Jungingen
Germany
Serial number or batch number
Date
Stamp and signature of the specialist dealer
51