How To Put On The Cuffs - Riester R1 Shock-Proof Gebrauchsanweisung

the fabric covering; metal hooks have been riveted to the fabric
on the other side.
The metal hooks are inserted into the metal bars in the cuff
fabric. Measure the circumference of your arm to make sure
that it lies within the range indicated on the cuff.
The following cuff sizes are available for the models listed
below:
R1 shock-proof, minimus
/ Square (all versions) and ri-san
Adult
D. Cotton bandage cuffs
There is a bandage strip and a hook on one side of the banda-
ge cuff. To attach the cuff, simply insert the hook into the ban-
dage strip. Measure the circumference of your arm to make
sure that it lies within the range indicated on the cuff.
The following cuff sizes are available for the models listed
below:
R1 shock-proof, minimus
big-ben ® Round / Square (all versions) and ri-san
Adult

How to put on the cuffs

A. Nylon-velcro cuffs
Disinfectable one piece cuff
A.1. Place the cuff 2-3 cm above the bend of the elbow on
the naked left upper arm; make sure that the symbol " "
is above the artery. Close the cuff by means of the velcro
closure.
A.2. In units intended for home use, the diaphragm of the
chestpiece integrated into the cuff must be placed above
the artery.
To put on the cuff, pull the free end of the cuff through the
metal D-ring and close the cuff by means of the velcro clo-
sure.
B. Cotton-velcro cuffs
C. Cotton bandage cuffs
D. Cotton hook cuffs
Place the cuff 2-3 cm above the bend of the elbow on the
naked left upper arm; make sure that the symbol " " is above
the artery.
B.1. Close the cuff by means of the velcro closure.
C.1. Fasten bandage cuff by inserting the hook in the ban-
dage strip.
D.1. In the cuffs with hook closures, insert the metal hooks
in the metal bars worked into the cuff fabric.
® II, minimus
®
arm circumference:
® II, minimus
arm circumference:
17
® III, big-ben
24 - 32 cm
® III,
®
24 - 32 cm
® Round