Selection Of Suitable Cuff Sizes - Riester R1 Shock-Proof Gebrauchsanweisung

5.1. Wall model
Remove the wing nut underneath the cuff basket and take
off the wall bracket. Hold the bracket against the wall at
the desired location and mark the positions of the moun-
ting holes for drilling. Drill the holes and insert screw
anchors in them. Now you can fasten down the wall brak-
ket with screws (see Fig. 1). Place the unit on the wall
bracket so that the top part of the wall bracket engages
the edge of the cuff basket and the bottom part fits over
the screw that protrudes from the underside of the cuff
basket. Now replace and tighten the wing nut on the pro-
truding screw.
5.2. Stand model
Mounting on stand:
Insert the column into opening provided in the base with
five casters. Fasten the column by tightening the hexagon
socket screw on the bottom part of the base using the hex
wrench included.
Using bolts to mount the unit:
The package in which the unit came includes a threaded
guide pin. Apply some adhesive to the threads. Insert the
pin into the opening provided for it on the underside of the
unit and tighten (see Fig. 2). Place the unit with the pin
onto the column of the stand and fasten it at the desired
height using the locking screw.
5.3 Anaesthetic model
Remove the wing nut underneath the cuff basket and take
off the wall bracket. Affix the wall bracket to the back of
universal clamp No. 10384 using the screws included (see
Fig. 3). Place the unit on the wall bracket so that the top
part of the wall bracket engages the edge of the cuff bas-
ket and the bottom part fits over the screw that protrudes
from the underside of the cuff basket. Now replace and
tighten the wing nut on the protruding screw.

Selection of suitable cuff sizes

A. Nylon-velcro cuffs
Disinfectable one piece cuff
Our nylon-velcro cuffs, Disinfectable one piece cuff have a tuf-
ted strip on one side and hooks on the other. This ensures that
the cuffs can be easily opened and closed quickly and repea-
tedly.
On all the models (with the exception of sanophon
are calibrated, i.e. provided with measurement lines.
To make sure that you have chosen the right cuff size, check to
see whether the white index line is in the range between the
15
® ), the cuffs