MAWEK WE210003A Bedienungsanleitung Seite 22

An intact battery will initially draw the maximum charging current for a certain time,
depending on the state of charge, and then the charging current reduces to a
minimum value of 1 A over several hours.
battery is approaching the end of its service life.
If the charged capacity is significantly greater (>130%) than the printed battery
capacity and the charging current does not reduce over several hours, the battery
must be checked for a cell short circuit.
The loading process can be interrupted at any time by pressing the "STOP" button
and answering the confirmation prompt in the affirmative, and the display jumps to
the basic menu.
Pulling the mains plug out of the socket also switches off the charger.
Always stop charging before removing the battery cables to avoid sparking when the
charging clips are removed.
If you interrupt the charging process of a battery mounted in a vehicle, the battery
cable must always be removed from the chassis first and only then the other battery
cable.
RCOMPENSATIO
BOOST CHARGE
22
If, for example, the
charged capacity is less
than 50% of the nominal
capacity printed on the
battery when it has
previously been
completely discharged, it
can be assumed that the