Cleanfix S170-2 SIM Bedienungsanleitung Seite 19

日本語
Español
Docking station
If the robot's dust container is not
emptying properly or the „
is solid white, it may indicate that the dust
tunnel is blocked.
Follow these steps:
1) Unplug and turn over the docking
station.
2)
Remove the dust tunnel cover with a
screwdriver.
3)
Remove dirt and deposits in the dust
tunnel.
Tip: Refer to the image for guidance.
Other parts
1) Clean the charging contacts and the omnidirectional wheel.
Note: These additional charging contacts are for use with a docking station
without dust extraction.
2) Clean the charging contacts of the docking station as well as the infrared
transmitter and the parking guidance surfaces (glossy black) with a soft cloth.
Italiano Français
" indicator
Deutsch English
16