MALFUNZIONAMENTI, LORO CAUSE E POSSIBILI RIMEDI
Malfunzionamenti
Cause
L' autocentrante non ruota in alcun
1. Spina di tensione non inserita
senso
2. Non corretto collegamento della
spina stessa
3. Tensione non conforme
Azionando il pedale invertitore A
1. Inversione di polarità
verso il basso l'autocentrante gira in
senso antiorario
L'autocentrante gira con forza insuf-
1. Non corretta tensione di rete
ficiente
2. Cinghia lenta
Lo stallonatore non ha la forza suffi-
1. Non é stata collegata la rete pneu-
ciente per stallonare la ruota
matica alla macchina
2. Insufficiente pressione alla rete
pneumatica
3. Riduttore di pressione chiuso o mal
regolato
ITALIANO
MALFUNCTIONS: CAUSES AND POSSIBLE REMEDIES
Possibili rimedi
Malfunction
1. Verificare il corretto inserimento
The chuck does not rotate in any di-
della spina nella presa e il suo collega-
rection
mento 2-3 (vedere 1.)
Pressing the invertor pedal (A)
1. Invertire le 2 fasi nella spina di
downwards the chuck rotates anti-
tensione
clockwise
The chuck rotates only weakly.
1. Verificare la corrispondenza fra la
tensione di rete e quella indicata sulla
targhetta del costruttore
2. Agire sul tendicinghia
The bead-breaker does not have suffi-
cient power to break the bead.
1. Collegare la rete pneumatica
2. Regolare in modo consono la pres-
sione della rete
3. Aprire o regolare in modo corretto
il riduttore di pressione
ENGLISH
Cause
Possibile remedies
1. Electrical supply not plugged in
1. Check the correct insertion of the
2. Incorrect plug connection
plug and its connections
3. Electrical tension is incorrect
2/3
(see 1)
1. Polarity inverted
1. Invert the two phases in the plug
1. Incorrect mains tension
1. Check the correspondence of the
2. Loose drive belt
mains tension with that shown on the
reg. plate of the machine
2. Adjust the belt tightener
1. The pneumatic supply has not been
1. Connect the pneumatic system.
connected to the machine.
2. Increase the pressure.
2. Pneumatic supply pressure too low.
3. Activate or correct the adjustment
3. Pressure reducer closed or badly
of the pressure reducer
adjusted
18