Maintenance And Cleaning; Inspection; Marking Identification - Zarges R3 Bedienungs- Und Betriebsanleitung

9 Maintenance and cleaning

Reusable Swivel Concrete Anchor may be wiped
down to remove grease or dirt with a clean dry
cloth.
The reusable concrete swivel anchor can be
wiped with a clean, dry cloth to remove grease
or dirt.

10 Inspection

All components of the Reusable Swivel Concrete
Anchor must be inspected prior to each use
and annually by a competent person other than
the user. Applicable standards may require the
user to conduct more frequent or mandatory
inspections.
All hardware must be free of cracks, sharp edges,
deformation, corrosion, or any evidence of defect.
Reusable Swivel Concrete Anchor must be free of
corrosion, chemical attack, alteration, excessive
heating or wear. All markings must be legible and
attached to the product. This product, according
to EN 795:2012, does not have an expiry date
providing before use and annual inspection are
satisfactory.
WARNING
If inspection reveals any defect, inadequate
maintenance, or unsafe condition, remove from
service until a competent person, as defined by
applicable standards, can determine the need
for authorized repair or disposal.
WARNING
Any equipment that has been subjected to the
forces of arresting a fall, or that has a deployed
load indicator, must be removed from service
until a competent person can determine the
need for authorized repair or disposal.
16

11 Marking identification

Embedded on stop sleeve