ECOFOREST ecoGEO Benutzerhandbuch Seite 55

urrent XXXX
Electrical heater:
Internal:  kWh
DHW:  kWh
Buffer:  kWh
Historical
Annual
Electrical heater:
Internal:  kWh
DHW:  kWh
Buffer:  kWh
Surplus control
Status: ON
Real: - kW
Setpoint: - kW
onsuption limit
Status: OFF
Real: 7 kW
Setpoint: 5 kW
e-Manager meters
Press ENTER
to access
Instantaneous
onsumption: 83kWh
Injection: 3kWh
Month/year
Annual
onsumption: 34kWh
Injection: kWh
Maximeter month/year
Annual
onsumption: kW
Month/year coverage
Annual
Production:
Surplus: 38%
Current day / month
Displays information regarding consumption of the electric auxiliary heaters on the
current day/month.
Note: The current day/month energy counter is reset when the day/month changes.
Historical
Displays monthly and yearly information regarding consumption of the electric auxiliary
heaters.
Note: The values shown correspond to the last 12 completed months, that is, the data
corresponding to the current month is not included.
Surplus control
Displays information on the status of the surplus control, the instantaneous
measurement of the network balance and the setpoint for the configured surplus
regulation.
Consumption limit
Displays information on the status of the consumption limit control, the instantaneous
measurement of consumption and the setpoint for the configured consumption limit.
Press to access the e-MANAGER meter menu.
This menu includes the e-MANAGER energy meter displays.
Instantaneous
Used to display the instantaneous values of the energy consumed and injected into the
network.
Month / Year
Used to display the monthly and annual values of the energy consumed and injected
into the network.
Month / Year maximeter
Used to display the monthly and annual values of the maximum energy consumed by
the network.
Month / Year coverage
Used to display the monthly and annual ratio of thermal energy produced in surplus
control.
55
User manual