ECOFOREST ecoGEO Benutzerhandbuch Seite 52

3.15. e-MANAGER menu
User menu 7/9
e-Manager
Information
Alarms
7/9 Surplus control
Enable:
onsumption control
Enable:
onsump limit:
3.16. INFORMATION Menu
Press for quick access to the information menu from the main screen.
User Menu 8/9
e-Manager
Information
Alarms
On/Off ODUs
ODU ODU

ODU3 ODU4
ODU5 ODU
On/Off HPs
HP HP
HP3 HP4
HP5 HP
7/8 Brine/Production
Brine
Outlet: 
Inlet: 5
DT: 3
Press: 
Pumps: 95
Brine/Production
RH Brine
Outlet: 
Inlet: 5
DT: 3

Press: 
Valv: 95
7/8 Production
Outd
Outlet: 
Inlet: 5
DT: 3
Press: 
Pumps: 95
Surplus control
Used to enable the surplus electricity control.
Note: The surplus control attempts to adjust the network balance (consumption and
injection) to the value set in the installer menu at all times.
Consumption limit
Used to enable the electrical consumption limit control.
3kW Used to set the maximum overall consumption value of the electrical installation by
means of the heat pump power control.
On/Off ODUs (ecoAIR)
Used to monitor the status of the outdoor units that are connected to the indoor unit in
a block installation of ecoAIR heat pumps.
--
On/Off HPs (supervisor)
Used to monitor the status of the heat pumps that are connected to the supervisor via
the pLAN bus.
--
Brine/production (ecoGEO)
Heat
35 
This displays the inlet and return temperatures, temperature difference, current
99 
pressure and the percentage of circulator pump regulation in the brine and production
5 
circuits or the regulation values of the simultaneous production valves.
4 bar
87 %
Heat
35 
99 
5 
4 bar
87 %
Production (ecoAIR)
Ind
35 
This displays the inlet and return temperatures, temperature difference, current
99 
5  pressure and the percentage of circulator pump regulation in the external and internal
module circuits.
4 bar
87 %
52
User manual