Quick Tools QUTS8 Bedienungsanleitung Seite 37

2.6.12. Mode
This menu selects when to heat after switching on.
There are 2 variants, Safe or
Fast.
SAFE: After turning on the
station, the following will be
displayed:
After any key is pressed, the soldering iron heats up.
FAST: The soldering iron heats up immediately after the station is turned on.
Change mode:
1. Open Menu.
2. Select the Start Mode field with the +/- keys and confirm with OK.
3. SAVE to save the settings and BACK to exit the menu.
Open menu. Select the Addresses field using
the +/- buttons and confirm with OK.
AddressPassword is displayed and the first
asterisk is highlighted. Use the +/- buttons
to select a digit between 0-9. Press the
button to confirm the entry.
Password to change the addresses:
865637
The address can now be changed with +/-, in
the range from 1-64. Press SAVE to save the
settings and BACK to exit the menu.
NOTE: You can obtain the "Solderings
Manager" PC software free of charge from
your supplier or from the manufacturer.
14
USER MANUAL