Quick Tools QUTS8 Bedienungsanleitung Seite 29

2.5.2 Switch on
Make sure that the station is completely switched off before connecting
or disconnecting the soldering iron. Failure to do so may result in
damage to the soldering station.
1. Place the soldering iron in the storage stand.
2. Connect the soldering iron connection cable to the soldering station.
Ensure that the plug is in the correct position.
3. Insert the mains plug into an earthed socket.
4. Switch on the station at the mains switch.
NOTE: Always place the soldering iron in the storage stand when not working
with it.
1. Turn it on with the power button on the back and then press any
button.
2. After switching on, it immediately heats up to the temperature that
was last used.
3. The POWER button (press 3 seconds) can
be used to turn the station on or off.
2.5.3 Select temperature
Press the direct dial button 1, 2 or 3
for at least 2 seconds.
Fixed Temperature Storage
Change temperature with the +/-
buttons
ATTENTION
6
USER MANUAL
: