Quick Tools QUTS8 Bedienungsanleitung Seite 34

2. Select the TempFenst- or Temp.Fenst+ field with the +/- buttons:
The field
3. The ON/OFF button can be used to turn the temperature window on and off.
4. Use the +/- buttons to select how far the target temperature may deviate. It
can be adjusted between 2-99°C.
5. SAVE to save the settings and BACK to exit the menu.
2.6.7. Password
Password protection is not active in the delivery state. The display shows an open
lock. The password is 000000 in the delivery state. This password will be
displayed in the menu as. As soon as this password is changed, changes (e.g.
temperature) can only be made if the correct password is entered beforehand.
After changing the password, the fixed temperatures (keys 1, 2 and 2) can no
longer be selected. After every time the station is switched off/on, it is always
password-protected.
press OK →
changes to ON/OFF
Open menu. Select the Password field with the +/-
keys and confirm with OK.
first star is marked!
When the first asterisk is marked, the +/- keys can
be used to select a digit between 0-9. The button
confirms the entry.
Then enter the new password and confirm it with OK.
For security reasons, the new password must be
entered again and confirmed with OK.
The display of the soldering station briefly shows
OK. Click BACK to leave the menu. After the
password has been changed, the soldering station is
password protected.
11
USER MANUAL